Glock CCU     

GLOCK NOTES:
The Glock pistols have three basic frame sizes - 'Full Size', 'Compact', and 'Sub Compact'. Mech-Tech CCU's are not available for sub compact Glocks. In the 'Full Size' series are the Models G20 (10mm), G21 (45ACP), G17 (9mm), G22 (40 SW), G31 (357 Sig), G34 (9mm Long Slide) and G35 (40 SW Long Slide). Within the full size series there are two frame widths as is the case for the compact series. Mech-Tech CCU's are not available for 10mm and 45 ACP compact series pistols. An interesting fact relates to Glock magazines. A frame separated from the slide and barrel will physically accept a magazine of a cartridge different from that for which the assembled pistol is designed (using magazines designed for the same series of frame sizes). What this means is that a Glock pistol  & CCU combination can be set up to safely fire a cartridge different from that for which the assembled pistol is designed. Example: The frame (lower unit) of a Glock designed to fire the 45 ACP cartridge in the assembled pistol can be safely used  with a CCU designed to fire the 10mm cartridge. This is accomplished by assembly of the 45 ACP Glock frame to the 10mm CCU and the use of a Glock 10mm magazine designed to be used with that series of frame size. This information is provided only to illustrate the flexibility of the Mech-Tech CCU.
(Caution: the foregoing does not imply that a Glock pistol designed for a given cartridge can safely shoot a different cartridge by simply switching the magazine - this is dangerous - do not try it! Likewise a CCU can safely fire only the cartridge for which it is designed!) If further clarification is needed please contact Mech-Tech Systems Inc.
This is a 'Glock Block' which is supplied with every Glock style CCU. This device provides the feed ramp needed just below the chamber of the barrel. When properly installed with the Glock lower and the CCU, the 'Glock Block' can not fall out of the unit. There are two sizes for this part - specify Glock  model when ordering.
 
To the left is the 'Glock-Block' in position on a Glock lower. With the Glock-Block positioned as shown, the lower is installed into the CCU and the Glock-Block provides the necessary feed ramp.

Click on the photo  for a larger image.

A Glock lower unit or frame ready to slip into a Mech-Tech CCU.

 

Glock CCU 'dressed up' with M4 collapsible stock and red dot optic.

This is the 'BASIC' unit - this is the fundamental unit you order to fit your Glock and includes only what is shown above plus a Glock Block. Nothing else is included with the BASIC unit. Stocks, Rails and other accessories are ordered additionally and are shown below. We have arranged things this way to allow you, the customer, the greatest degree of freedom to 'build' exactly what you want within the choices shown below.

NOTE: Prices do not include shipping/handling charges. (updated 12 MAR 09)

NOTE: Older CCU models featuring a welded-on fixed stock will need to be upgraded to the newer housing in order to use the interchangeable stock system. Please see the 'Accessories' page on this website (below price table) for details. The other accessories will fit the older CCU models.

The Various Glock Models:   Compact Size = G-19 (9mm); G-23 (.40 S&W)

Glock 32(.357Sig) [Also 'C' models]     Standard Size = G-17,G-34 (9mm); G-20 (10mm):

             G-21 (.45ACP): G-22, G-35 (.40 S&W): G-31 (.357 Sig) [Also 'C' models]

 Slim Frame (SF) models for the above where it applies

 

   PART#                                                   DESCRIPTION     PRICE

    G-XXX

  BASIC UNIT  (9mm; 45ACP; 10mm;  40 Smith & Wesson, 357 Sig [Note] ) To specify part # replace 'XXX' with the Glock model number for your pistol.      eg:   G-17 is the part number of the basic unit to fit a Glock 17 pistol. (DO NOT use 45 Super ammo in 45 ACP units )

  $ 359.95
   M4   M4 – 4 POSITION COLLAPSIBLE STOCK   $ 89.95
   TEL

  TELESTOCK

   $ 89.95
   FXD   FIXED STOCK   $ 19.95
   MDEC   MUZZLE DEC  (must be factory Installed - be certain to specify)   $ 10.95
   GBL   REPLACEMENT GLOCKBLOCK (standard)   $ 12.95
   GBM   REPLACEMENT GLOCKBLOCK (compact)   $ 12.95
   QRL   QUADRAIL (important to specify the Glock model)   $ 99.95
   FSM   FIXED SIGHT MODULES (PAIR - FRONT AND REAR ADJUSTABLE)   $ 19.95
   RG   SNAP-ON RUBBER RAIL GUARDS (12 PACK)           $ 14.95
   RSR   RISER   $   4.95
   MRL   MONORAIL   $ 79.95
   M16F   M16 FRONT SIGHT (ADJUSTABLE)   $ 28.95
   M16R   M16 CARRY HANDLE REAR SIGHT (ADJUSTABLE)   $ 59.95
   VG   VERTICAL GRIP - FIXED   $ 16.95
    VGF   VERTICAL GRIP - FOLDING   $ 24.95
   BP   BUTT PAD FOR M4 STOCK   $  9.95
                   SEE 'ACCESSORIES' PAGE FOR DETAILS AND MORE ACCESSORIES  

        To Order Please Call   866-433-2122 or 1-406-756-9309

    NOTE: Business Hours: 9:00AM - 3:30PM Monday - Thursday, Mountain Time                               (email anytime - see 'CONTACT/ORDERING' page) We are CLOSED FRIDAYS

                               PRICES SUBJECT TO CHANGE WITHOUT NOTICE  

NOTE: The .357 Sig is a bottle-neck cartridge and the brass is highly worked in the CCU blowback action. Use only factory fresh ammo - reloading can result in case separation!
Fit Alert: It has recently come to our attention that certain older G17 frames will not fit our Glock CCU. We do not have a details on just what serial number range is involved but to date most such lowers have 'KY' at the beginning of their s/n's. There is an easy fix for this for those daring enough to consider a simple mod to the frame. The guilty feature is a non-functional plastic flash near the metal rail tabs. This flash can be removed with a pocket knife and is of no consequence to the proper function of the pistol. This flash interferes with insertion of the lower into our CCU. Check with Mech-Tech customer support or a competent gunsmith for details.
Legal Alert: Our product is not a firearm by legal definitions. The product is for sale to California residents under limited conditions. Although the product itself is legal, as we understand things, the resulting combination with a pistol frame becomes illegal under California law. If you are a CA resident you should be aware of this and it is your responsibility to observe CA laws. At this time we know of no other States where the combination is not legal but we caution everyone to become aware of relative state and local laws. We are not attorneys and can give no meaningful advice on these matters.

 

sp;